FAQ

The maintenance of the drive shaft, regular inspection, it is necessary to carry out periodic working condition detection of the drive shaft. The review should include the following: The connection of the drive shaft is loose or worn. There are no cracks or other forms of mechanical damage to the pr......

The basic working method of the drive shaft, the drive shaft largely makes use of a universal joint that enables it to rotate to achieve various angles of rotation. For example, in a four-wheel drive vehicle, the wheels can be roughly perpendicular to the body, and the axle can also be rotated at th......

Transmission shaft structure, a drive shaft class according to its application field, it can be divided into two categories: the front curved wheel drive shaft class and the rear curved wheel drive shaft class. The front bend wheel drive shaft is a thick, short wheel that transmits energy to the fro......

In the removal of hub bearings must use special tools! This is particularly important; In addition, do not hurt the thread of the tire bolt when removing the tire, if it is a disc brake, you should remove the brake, and then use a tool to remove the lock ring or lock pin.

The common damage problems of the tightening pulley mainly include the following:

The pressure limiting valve is generally composed of a valve body (vertebrae, spherical), a valve seat, a regulating spring, a pressure regulating screw and a locking nut, and a sealing washer. The working principle of the pressure limiting valve is: in most of the time, the pressure limiting valve ......