China High Quality 2123202125 Suppliers

For air springs sealed with a hoop ring, the general inflation pressure should not be less than 0.07 MPa; for those utilizing flange clamping or self-sealing under pressure, the inflation pressure must be no less than 0.1 MPa. Typically, the design pressure of an air spring is one-third of its burst pressure; in optimal working environments, this design pressure can reach up to half of its burst capacity.

Today, when discussing issues with some customers, they all asked me if I could buy the parts for this Mercedes Benz truck from a secondary factory because the original factory is too expensive. In fact, I would like to sincerely tell everyone that the secondary factory is cheap, but in addition to its short service life, it is also very harmful to other parts of the car itself.

The drum test brake is to install the friction pad of the Henan truck accessory manufacturer on the surface of the two arc brake shoes, take one end of the brake shoe as the support point, and increase the driving force from the other end to make the brake shoe press towards the inner side of the brake drum and brake. In the hydraulic mechanism pump, the piston rod of the Henan truck accessory manufacturer of the brake master cylinder immediately promotes the brake shoe; In the event of air impact braking, narrow air will promote the rotation of a camshaft to make the brake shoe extend outward. When the brake working pressure subsides, the return torsion spring pulls the brake shoe away from the brake drum, thus eliminating the brake.

SYHOWER 20576186 VOLVO Cooling Fan Clutch with stable performance and strong cooling function, smooth rotation and bass operation. In order to better serve customers, we have opened a 24-hour service hotline. All overseas people are welcome to come to inquire.

In many parts of the automobile, the NOx Sensor plays a crucial role. However, with the increase of use time, the NOx Sensor is likely to have carbon deposition problems, affecting its normal working performance. Today, we will take a detailed look at the processing methods and cleaning skills of carbon accumulation in NOx Sensors.

Where is the oil consumed? Some of them ran to the combustion chamber due to "oil channeling" and were burned or formed carbon deposits, while the other part leaked from the place where the seal was not tight.